June 1, 2018

How to dye Lace fabric?

- The actual quantity of dye you will need is determined by simply how much lace you wish to dye. If you have 1 pound (450 g) of lace, you will one package of dust dye or 1/2 container of liquid dye, as well as 3 gallons (12 L) of heated water.
- If working together with powdered dye, reduce it in 2 glasses (500 ml) hot water initially before incorporating it into huge bucket of liquid.
- The best water heat for the dye bathtub is 140 levels Fahrenheit (60 degrees Celsius).
- Make certain you add the dye towards water before including the lace. In the event that you add the lace first, you could trigger spotting to happen.
- You should utilize a wood or plastic mixing spoon to keep the lace submerged. You might make use of your hands so long as you have actually thick rubberized gloves on.
- Its strongly suggested which you wear plastic gloves, a smock or apron, and garments you do not mind dirtying while working with dye.
- Use salt if for example the lace contains cotton fiber, rayon, ramie, or linen. Usage vinegar in the event your lace includes nylon, silk, or wool.

- If you need a more subdued effect, only keep consitently the lace in for 8 to ten full minutes. Lace absorbs dye quickly and will not should sit-in a dye bath for lengthy.
- Stirring the lace is highly recommended since doing this helps the material dye evenly.
- Tepid to warm water rinses from the area dye better, but chilled water is preferred after you fully grasp this area dye down because it discourages along with from hemorrhaging completely.
- Note that the lace will likely to be a somewhat lighter shade when it dries.
Method 2
- Ready your work space. For this technique, you will need to put your lace from a flat surface and "paint" the lace with dye manually. As a result, this working room has to be shielded.
- Spread a synthetic case, tablecloth, or dropcloth regarding work area.
- It's also advisable to fill a fine-mist spray container with liquid. This water comes into play useful for touch-up work, and you will also put it to use maintain the lace from becoming dry while you run other portions.
- Prepare the dye. Squeeze one or two falls of every dye into an independent compartment of a plastic paint palette, split dish, or similar container. Dilute each color with 10 drops of tepid water.
- The dye color is extremely concentrated, so that you will have to dilute it with liquid. Try not to decorate the lace right with undiluted dye.
- If you prefer a stronger dye color, you could add another drop or two of dye. Similarly, you'll produce pastel colors with the addition of 5 to 10 even more drops of water.
- Consider soaking the lace. Soaking the lace helps the material digest, scatter, and mix the dye. If you'd like more distinct colors, but you really need to maintain the lace dried out.
- If you choose to moisten the lace, immerse it first-in a full bowl of warm water.
Roll the lace in a towel and squeeze out the extra liquid before lace is scarcely damp.
- Alternatively, you might spray the lace with water from a fine-mist spray bottle to dampen it rather than soaking it initially.
- If you choose to moisten the lace, immerse it first-in a full bowl of warm water.
- Load a thin paintbrush with dye. Dip the end of a fine-tip paintbrush into your first dye shade. Lightly paint the specified section of lace with that dye shade, using a rather gentle touch.
- Utilize the tip of this brush to color the fine details. If you need to protect more material, you need to use the entire brush head.
- Thoroughly wash and dry the brush before loading it with a new dye shade.
- If you should be working together with wet lace, mist the lace with liquid periodically maintain it wet.
- Apply multiple levels of dye as required. Use a gentle touch when applying the dye. After your initial application, return back over those same places again with another level of dye, repeating this until such time you achieve the specified tone.
- Do not dampen the lace once again when incorporating several levels of dye.
- Lace absorbs dye rapidly, when you get also impatient and use an excessive amount of at the same time, you may end up making the lace also dark.
- If lace becomes too dark, you can blot away the extra dye with a report bath towel. This increases results if you use a wet application instead of a dry application, however.
- Dry the lace. You can dry the lace by atmosphere, but doing this may end in a spotty look. You'll likely do have more success by using a hair dryer to quicken the drying process.
- By speeding the drying procedure, you reduce the scatter of dye shade which comes about whenever liquid component of the dye evaporates.
- Set the color using a metal. Change the lace over so the wrong side deals with up. Iron it on a wool setting with a standard iron for around two minutes. Along with is well set later.
- Observe that establishing the color with an iron also assists soften the lace.



