Tie Dyed fabric

Protect your projects surface with a plastic dining table address.

For best results, prewash and dry product to eliminate any finishes that may affect dye consumption.

choose your dye colors. One to three colors can be used. When using more than one color, it’s usually best to start with the lightest color.

When tie-dyeing with two or more colors, it's best to put adjacent primary colors (red, yellow, blue) or additional colors (orange, green, purple) close to both. In the places where they operate together, they create a 3rd, great-looking color. As an example, Scarlet and golden-yellow will create Orange; Royal Blue and Kelly Green is going to make Aqua; Fuchsia and Royal Blue will generate Purple.

There are lots of how to produce tie-dye patterns and styles. As an example, to produce a fundamental marbleized tie-dye design, scrunch material into a ball and cover it with elastic bands in various guidelines. The stronger the fabric is covered, the greater amount of white places you will see. To produce stripes, fold the fabric vertically or diagonally, like an accordion or lover, in 2” to 3” broad folds. Wrap with rubber bands every 2” – 3” or as desired.

Prepare all the dye bathrooms before beginning to tie-dye. Wear rubberized gloves before dealing with dye. They stop colorful fingers and gives protection from the hot-water inside dye shower.

Shake all fluid dye bottles before pouring the dye. Measure and mix ½ cup liquid dye in about 2 – 3 gallons hot liquid (at least 140ºF). If making use of dust dye, dissolve 1 package in 2 glasses hot water; stir well before contributing to liquid. If liquid is certainly not hot enough, temperature liquid in a tea kettle or the microwave. The hotter the dye bath, the more powerful the colors is. For dark or brilliant colors, twice as much quantity of dye utilized. Note: If dyeing multiple items at a time, the quantity of dye and water should-be increased based on the fat for the shirts. As a guideline, 1 bottle of dye or 2 bins of dust will color to 2 weight of dried out body weight material (about 6 – 8 size small t-shirts).

For cotton fiber textiles, add 1 cup salt to each dye bath to assist intensify along with. For silk, wool or nylon, include 1 cup white vinegar. Stir well to make sure sodium or vinegar is dissolved.

To begin, submerge your wrapped material into the lightest shade dye shower for 4 to 10 minutes or so long as 30 minutes, stirring sometimes. The longer the textile is in the dye bathtub, the darker along with will likely be. Eliminate once the color is just a little darker than desired (color seems darker when material is wet).

If desired, carry on dipping wrapped fabric an additional shade or unwrap material, cutting rubber bands. Rinse really in cold water, fit on excess liquid and put once again. After that immerse within the next darkest color. Perform before you used all your colors.

Eliminate textile from dye shower. Operating scissors, carefully cut away the elastic bands. Rinse in cold water until water works clear.

Wash garment in warm water with mild detergent. Rinse carefully in chilled water. Gently fit completely excess liquid by moving top in a clean old bath towel. Machine dry or hang to dried out.