Instructions for Rit dye

Very first, you need to wash and dry the item become colored to obtain the most useful outcomes. Cover your work surface with synthetic to make sure you cannot stain everything. Weigh their item so that you discover how much dye to make use of. One-half of a bottle of fluid dye or one package of powder dye is going to be enough for approximately one-pound of textile.

Fill your synthetic bucket with hot water (about 140 degrees Fahrenheit). Make use of adequate water allowing the fabric or product to maneuver freely.

Always put on rubber gloves and commence by trembling the dye container or dissolving one package of powdered dye in 2 cups of scorching liquid. Add the dye into water and blend until completely mixed.

For cottons, reduce 1 cup of salt in 2 cups of hot-water and include it into dye. For silk, wool or plastic, add 1 cup white vinegar on dye. Add a squirt of dishwashing liquid and blend the combination well.

Test the dye color on a scrap bit of textile to make sure it’s the shade you desire. Add much more dye or higher water if the color isn't rather correct.

Wet the textile or product with tepid to warm water and press out the extra liquid. Add them towards dye.

Stir continuously for 10 to 30 minutes. Ensure that the item does not get tangled to stop irregular dyeing. The longer that is within the dye bath, the darker colour would be.

Remove the item from the dye bath and rinse thoroughly in warm water. Rinse with cooler water before liquid runs clear.

Wash your product yourself in tepid water with moderate detergent and wash in cool water. Hang the item to dried out or operate it through the dryer with like colors or a classic towel. Be mindful washing your recently dyed product the very first couple of times. It might probably bleed, therefore just wash it with old towels or like colors to stop destroying various other items of clothing.